Rust Inhibitor 56H
Description
RUST INHIBITOR 56H will passivate steel surfaces due to the presence of selected corrosion inhibitors. Parts dipped in RUST INHIBITOR 56H will, after drying, be protected or inhibited against corrosion. A few examples where such a dip is required is in the final rinse after plating, cleaning, pickling, phosphating, tumbling, wet grinding, or general machine shop use between operations. RUST INHIBITOR 56H does not contain any nitrites. Water evaporates almost immediately from a metal surface after withdrawing from a dip in warm RUST INHIBITOR 56H. This extremely fast drying occurs because of the inhibitors remarkable which reduce surface tension to a remarkable degree and accelerate the shedding of water from all surfaces. The remaining invisible, dry, non-oily film, which is non-measurable, will inhibit against rust or corrosion. The properties of the metal surface are unchanged and retain their original luster or brightness.
Safe Handling and Storage Instructions
Form
RUST INHIBITOR 56H is an alkaline liquid.
Use Instructions
-
Bath Parameters:
-
Concentration: 1 – 5% by Volume
-
Temperature: $70^{\circ}F – 160^{\circ}F$ ($140^{\circ}F – 160^{\circ}F$ Preferred)
-
Time: 30 Seconds – 3 Minutes
-
-
Parts should be thoroughly dried prior to packaging or storage.
RUST INHIBITOR 56H is mildly alkaline.
Caution: RUST INHIBITOR 56H contains amines. This product should not be used in operations where nitrite containing products are used due to the possible formation of carcinogenic nitrosamine compounds.
Read the current Safety Data Sheet thoroughly before using this product.
Disposal
RUST INHIBITOR 56H is mildly alkaline and may be disposed of with alkaline cleaner wastes. Consult local, state and federal authorities for waste disposal requirements.
Precautions
KEEP OUT OF THE REACH OF CHILDREN.
Please refer to the label and Material Safety Data information for all warnings, recommendations for safety equipment, and other regulatory information. Copies of the Material Safety Data information can be ordered by calling +86-21 58486100.
Click here for more information: Rust Inhibitor 56H
category: DuraTEC 400 , CIMCLEAN® HA401D , Rust Inhibitor 56H
Safe Handling and Storage Instructions
Form
RUST INHIBITOR 56H is an alkaline liquid.
Use Instructions
-
Bath Parameters:
-
Concentration: 1 – 5% by Volume
-
Temperature: $70^{\circ}F – 160^{\circ}F$ ($140^{\circ}F – 160^{\circ}F$ Preferred)
-
Time: 30 Seconds – 3 Minutes
-
-
Parts should be thoroughly dried prior to packaging or storage.
RUST INHIBITOR 56H is mildly alkaline.
Caution: RUST INHIBITOR 56H contains amines. This product should not be used in operations where nitrite containing products are used due to the possible formation of carcinogenic nitrosamine compounds.
Read the current Safety Data Sheet thoroughly before using this product.
Disposal
RUST INHIBITOR 56H is mildly alkaline and may be disposed of with alkaline cleaner wastes. Consult local, state and federal authorities for waste disposal requirements.
Precautions
KEEP OUT OF THE REACH OF CHILDREN.
Please refer to the label and Material Safety Data information for all warnings, recommendations for safety equipment, and other regulatory information. Copies of the Material Safety Data information can be ordered by calling +86-21 58486100.
| Brands | DuBios |
|---|